I'm running into an issue when buying stock. Most of it is at least a few thou oversized, sometimes more. I can jam it in there if I really force it, but there's no way my bar puller is gonna be able to handle that. This is mostly aluminum bars, some brass. How are you guys dealing with this? Are certain suppliers better about on size or slightly under size stock? I would think going a 64th up in size on the collet may work, but it can't be optimal since it's only gonna grip at the nose. Only other option I can think of is turning some emergency collets like 5 thou over my common stock sizes, but I thought I would check and see how others are dealing with this