584,862 active members*
5,349 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc tape drill OM error PS581 when M6T...
Results 1 to 3 of 3
  1. #1

    Fanuc tape drill OM error PS581 when M6T...

    hi guys
    I have a problem with the MC010 Fanuc OM-A without a ladder
    Axes work, spindle works (M3 AND M4 with S works good), m19 works , but when I give M6 T... then I have error PS 581 servo alarm) and Vardy OFF 401

    please help me how to solve it, it looks like some parameters are bad
    i have Manuals copy and diagram for this machine if any wont i can send

  2. #2
    Join Date
    May 2016
    Posts
    526

    Re: Fanuc tape drill OM error PS581 when M6T...

    Please pm me I believe you've deleted your tool change files

  3. #3

    Re: Fanuc tape drill OM error PS581 when M6T...

    Hello Wojtek

    I do have the same problem like you on exactly same machine

    Did you fix it ? If you did, what was the problem

    Thanks Alex

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •