[thewillow]

Hi Folks, I've been looking for some script to help with my triple edge finder, but want to keep things relatively simple. ie; no screen sets etc. I had a look at some programs and thought I may be able to write something myself, being fairly fussy. One was using the back of the finder, but I thought it may work better using the front left to avoid knocking the piece from it's position. This is my first attempt at g-code and I was hoping someone may be able to give it a once over and see if it would (could) work. cheers
G21
G38.2 Z-12.7 F50
G92 Z3
G91 GO Z12
G91 GO X-25.4
G91 GO Z-25.4
G38.2 X12.7 F50
G92 X-3
G91 GO X-5
G91 GO Y-30
G91 GO X30
G38.2 Y12.7 F50
G92 Y-3
G92 GO Y-5
G91 GO Z30

Thanks in advance if someone has the time.

[MyGarageShop]

Hi Folks, I've been looking for some script to help with my triple edge finder, but want to keep things relatively simple. ie; no screen sets etc. I had a look at some programs and thought I may be able to write something myself, being fairly fussy. One was using the back of the finder, but I thought it may work better using the front left to avoid knocking the piece from it's position. This is my first attempt at g-code and I was hoping someone may be able to give it a once over and see if it would (could) work. cheers
G21
G38.2 Z-12.7 F50
G92 Z3
G91 GO Z12
G91 GO X-25.4
G91 GO Z-25.4
G38.2 X12.7 F50
G92 X-3
G91 GO X-5
G91 GO Y-30
G91 GO X30
G38.2 Y12.7 F50
G92 Y-3
G92 GO Y-5
G91 GO Z30

Thanks in advance if someone has the time.

Triple Edge Finder Script
https://youtu.be/FUlXikOPHbw