584,858 active members*
4,478 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Doosan LYNX2100LY lathe turret error
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2019
    Posts
    2

    Exclamation Doosan LYNX2100LY lathe turret error

    Hello, I'am Mantas, new here. I have big problem, maybe you can solve this. I change tool and when I try to turn to another tool I crash in wall with new tool, and now I got error "70010 Abnormal turret clamp" and I can't do anything. It's possible to do something? Sorry for my bad English.

  2. #2
    Join Date
    Jul 2019
    Posts
    2
    Photo of error
    Attached Thumbnails Attached Thumbnails IMG_20190717_162700.jpg  

  3. #3
    Join Date
    Sep 2007
    Posts
    66

    Re: Doosan LYNX2100LY lathe turret error

    hi,

    You have to manualy unclamp the turret by changing a keep relay K0005.4 : KTALM (tool unclamp mode) change the 0 to 1

    now the turret unclamps en you can rotate it , rotate a tool to center hight and make K0005.4 zero again.

    then you can go to MDI and make a tool call.

    This is for a GT2600 but it should work the same , trying is at own risk

    greetings bertus

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •