Whilst running a batch of parts on my T80 (Storm 80 I think to those of you in the USA?) today the turret bommed out and gave me a referencing error.
I had to power down and back up to get the machine going again, but now when executing T0101, the turret is moving to T0202 position, T2 = T3 position etc...

I've done quite a lot of searching & reading and have tried setting the turret to T1 position and resetting parameter 1815.4, but unfortunately this hasn't made any difference.

Can anyone help me with resetting the turret reference position please?

Many thanks
Mike