Good to know, guess I am pretty interested in a parallel mounted camera if it is pretty precise. From what I can gather I just tether the camera and cohesion control board to two of my computer's USB ports and so long as lightburn can find the camera I just let it sort itself out.
As a boon of curiosity, do you think it is possible to wire the camera direct to the cohesion board and then connect to my computer through a single USB instead of two? It's not a requirement but more of a whim to learn to do something new. I took a look at the pin out and it looks possible.I have an SQ13 camera with a 5 pin micro USB connection that breaks out to a 5V VCC/GND, Digital-/Digital+, and ID. The cohesion mini has 5V/GND auxillary power pins as well as a RX/TX pins free of an LCD break out (sweet), just not sure if I can dedicate any random processor pin to the ID to use as an enable pin or if it's just some null shielding I can ignore.