509,973 active members
3,689 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Dec 2014
    Posts
    61

    5C Collet Chuck

    Does anyone know of a collet chuck and back plate for a Smithy 1440 lathe? Smithy does not make one. The lathe is great, just would like to have a collet chuck.

    Thanks.

  2. #2
    Registered
    Join Date
    May 2015
    Posts
    360

    Re: 5C Collet Chuck

    Time to make your own backplate. Cast iron is the best material if you can find a slice


    There are a couple of ways to do this and I've done this before. The first step is to machine a recess fits the boss on your faceplate. The hard bit is to get the dimensions exact before removing the backing plate or you are no longer concentric.

    So I decided to make a pattern piece by holding a slice of 160 mm dia cast iron in a 4 jaw chuck, machined a boss and testing the fit on the back of my 3 jaw. Once I had an exact fit, I chucked up the second piece and repeated the exercise but this time machined a recess that was an exact fit to the boss I had machined. Then marked the bolt positions and drilled and tapped some holes so I could mount the part to the lathe.



    Sort out some mounting holes


    So now we can mount the part and machine it while its attached to the face plate



    So now you can machine the mounting plate to suite the back of your collet chuck



    And finally mount the chuck which should have perfect alignment
    Rod Webster
    www.vehiclemods.net.au

  3. #3
    Registered
    Join Date
    Dec 2014
    Posts
    61

    Re: 5C Collet Chuck

    Thanks so much for this tutorial on how to do it. Much appreciated.

Similar Threads

  1. Hydraulic expansion chuck vs. Collet chuck
    By gocuk in forum Metal Working Tooling
    Replies: 3
    Last Post: 12-05-2011, 04:42 PM
  2. Online ordering power chuck, collet chuck, MC vises form Taiwan
    By mtadirect in forum News Announcements
    Replies: 0
    Last Post: 08-30-2009, 03:37 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •