Hi Everyone, posted in kitamura section but since its generic to fanuc and i have no answers i was hoping to post to a more generalized category.

anyway, i am used to a Tormach and picked up an 86 mycenter with fanuc 6m. I am having a hell of a time figuring out how to keep my G54 location set. Bascially i figured out that in order to set G5X i need to zero return the machine and tell it how far from zero return the x and y origin is. Great. Ill set it, jog it around a bit and go into some menus to setup a couple things, and out of habit or maybe necessity (maybe i overtravelled) i have to hit reset. When i do this, the absolute position changes to the G54 coordinates. this is incredibly irritating because i cant seem to get it properly setup to run a part. Can anyone help me out here, because maybe i am incorrectly using the control. Another thing i noticed, when i power up the machine it defaults to INC at the bottom, i toggle it to abs but it doesnt seem to affect this problem at all.

PS man. abs. switch is on.

To Recap my process:
1. power up machine, hit abs button, zero return
2. jog to x origin and write down coordinates
3. jog to y origin and write down coordinates
4.type in the coordinates for the G54 position location
5. jog machine up and out of the way
6. something requires a reset, may be an overtravel or clearing what i typed into the command
7. absolute position changes to G54 coordinates that i typed in (essentially shifting the G54 whatever i moved in x,y,z)
8. start all over while swearing

HELP?!