Originally Posted by
mactec54
Yes good luck with that Profile as it is nothing like the real spec's for these timing pulleys, and the profile changes by the number of teeth, just the same as if you where to cut Gear teeth, which have different gear cutters or hobs as the number of teeth change, just giving you a heads up before you get to much into the design, I saw what you where asking, but new you would have more problems than just the 360 software
What you find on the internet is just some very rough numbers for the belts, the Pulley Profile is quite different and are not advertised as Gates have patents in place that cover the use of there intellectual property