584,837 active members*
5,372 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Autodesk CAM > Autodesk Post Processors > ikegai Tur 25 spindle post for fusion 360
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2003
    Posts
    31

    ikegai Tur 25 spindle post for fusion 360

    Hi Guys I am in need of a post processor for a fanuc OT lathe with live tooling can anybody help me ?
    The fanuc post in fusion do not work i tied them all
    Thanks

  2. #2
    Join Date
    Dec 2013
    Posts
    5717

    Re: ikegai Tur 25 spindle post for fusion 360

    Is it only the live tooling that is the problem or the Fanuc post won't run at all? I just hand write the G code for the live tool operations on mine because I'm too lazy to modify the post processor. You might modify a Haas mill/turn post to work on the OT.

    You could do what I did with my OT and rip out everything that says Fanuc on it and replace it with modern hardware and controls.
    Jim Dawson
    Sandy, Oregon, USA

Similar Threads

  1. ikegai Tur 25 spindle
    By Ernie in forum SERVICE FOR CNC-MACHINES
    Replies: 1
    Last Post: 03-26-2020, 03:01 AM
  2. Ikegai FX25II won't turn the spindle
    By Lekasteel in forum Fanuc
    Replies: 4
    Last Post: 03-24-2015, 08:44 AM
  3. Ikegai Spindle Problem
    By pquerro in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 03-17-2013, 10:58 AM
  4. Ikegai fx15n Spindle won't start
    By adscnc in forum MetalWork Discussion
    Replies: 0
    Last Post: 09-01-2009, 12:30 PM
  5. Ikegai 20N 5T spindle speed problem
    By BKBridges in forum Fanuc
    Replies: 4
    Last Post: 08-18-2009, 08:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •