[Cmac139]

Anyone know where the z assembly on a Saturn 2 is sourced? I was hearing some grumbling during a project and would like to get some spare bearings just in case. I checked with CNCRouterparts and they advised it wasn’t theirs. Any insight?


Sent from my iPad using Tapatalk

[Erik F]

Anyone know where the z assembly on a Saturn 2 is sourced? I was hearing some grumbling during a project and would like to get some spare bearings just in case. I checked with CNCRouterparts and they advised it wasn’t theirs. Any insight?


Sent from my iPad using Tapatalk

The linear bearings are chtr. Not sure about the ball screws and nut.

http://m.chtrmotion.com/ball-type-linear-guides/linear-motion-guides.html

They are a knock off of THK brand. If you look up TRH linear bearings that should help you find comparable ones. There two types on these machines. Long and short style. If you look at the bearing look for the print on it that says TRH30...at least that is what is on mine.

[Cmac139]

The linear bearings are chtr. Not sure about the ball screws and nut.

China Linear Motion Guides Manufacturers, Factory - Customized Linear Motion Guides Wholesale - Three-Ring

They are a knock off of THK brand. If you look up TRH linear bearings that should help you find comparable ones. There two types on these machines. Long and short style. If you look at the bearing look for the print on it that says TRH30...at least that is what is on mine.

Excellent!! Thank you very much for the info!