584,319 active members*
6,313 visitors online*
Register for free
Login

Thread: Ladder on 0T

Results 1 to 6 of 6
  1. #1
    Join Date
    Aug 2007
    Posts
    793

    Ladder on 0T

    Hi
    I tried to set bit#2 of parameter 60, so that bring the ladder up on the screen, but it's impossible to change this parameter. How can I open ladder? PWE was = 1. Is it real to extract ladder from control via RS232 and open it in Fanuc Ladder III?
    Regards

  2. #2
    Join Date
    Nov 2006
    Posts
    175
    If it is on EPROM, no way. See on the memory board, if 0F1 and 0F2 exist (or 011, 012?), there is the ladder. If so, contact me, I can help

  3. #3
    Join Date
    Jun 2006
    Posts
    31
    Can you read the parameter 905 of your machine?

  4. #4
    Join Date
    Jun 2006
    Posts
    31

    Parameter905

    Hi
    If your option parameter 905 is 0001000 ,your controller do not have any of
    PMCL/M,so you cannot display the ladder
    tungtung

  5. #5
    Join Date
    Jun 2006
    Posts
    9
    Hi
    If your controller is fanuc 0MB you can not view ladder diagram

  6. #6
    Join Date
    Jul 2023
    Posts
    13

    Re: Ladder on 0T

    hello!...do you have the binary files of the master card A16B-1010-0210/16D of the Centrum 3000 punch press...they are OE1, OE2, OC1, and OC2...the executive software version is 0130-11?

Similar Threads

  1. Ladder editing
    By luca_r in forum Mazak, Mitsubishi, Mazatrol
    Replies: 7
    Last Post: 06-05-2009, 09:02 AM
  2. So whatsa ladder?
    By Dancy in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 3
    Last Post: 01-18-2008, 11:57 PM
  3. PMC-LADDER
    By CHANDRU in forum Fanuc
    Replies: 2
    Last Post: 12-14-2007, 04:17 AM
  4. Fanuc ladder
    By guhl in forum Fanuc
    Replies: 3
    Last Post: 12-07-2007, 07:54 PM
  5. OTA/OTC ladder acess
    By Htech in forum CNC Machining Centers
    Replies: 1
    Last Post: 10-30-2007, 02:54 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •