Advantages
Solenoid valves are extremely versatile. They can be utilized in several various and distinctive system applications handling air, water, oil, gas, steam… just about any liquid or aeriform substance.
Another issue that’s nice regarding coil valves is that they’re a awfully economical means that of automatic flow management for liquids and gases. These forms of valves need very little wiring, expense, and energy compared to alternative valves.

Disadvantages
Solenoid valves have a tough time with dirty or contaminated fluids/gases. Foreign matter will accumulate within the core tubes and impede operation.
It’s conjointly important that the correct voltage is applied to those valves. Too little and it won’t open or shut, could cause “chattering” and excessive noise, and will wear faster. Overvoltage can generate an excessive amount of heat and untimely wear the coil.
They’re also sensitive to moisture. Moisture within the coil enclosure can cause the coil to fail, and also the valve to prevent opening/closing.
If you’re thinking a coil valve can be right for your application, talk over with engineer seasoned in selection/sizing of those forms of valves. Doing thus can facilitate your system perform at its highest potency, whereas requiring less maintenance.

For More Details Refer Below Link
http://www.maniks.com/manufacturer/d...-manufacturer/