502,248 active members
6,714 visitors online
Register for free
Login

Thread: Relay

Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Jul 2018
    Posts
    7

    Relay

    Hi all, do I need a relay in the line from control board to spindel??

    Mike

  2. #2
    Super Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23140

    Re: Relay

    What board? what spindle?
    Here is a link for a G540 to VFD example, often it can be done this way, depending on the nature of the equipment I/O.
    https://www.cnczone.com/forums/spind...equipment.html
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  3. #3

    Join Date
    Jan 2005
    Posts
    10005

    Re: Relay

    Quote Originally Posted by 3dmike View Post
    Hi all, do I need a relay in the line from control board to spindel??

    Mike
    Would have to know what you have spindle Drive Spindle Control Etc. most likely not though, spindles don't normally run direct from a control board
    Mactec54

  4. #4
    Super Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23140

    Re: Relay

    I have edited and posted the correct link for direct interface shown in post #2.
    Al.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •