Swapping Work Offsets On One Job
Anybody do something like setup two parts in two vices on the mill and zero G54 to one and G55 to the other? Any issues with this with PathPilot. I can't imagine there should be, but...
I have done it many times under Mach 3 on my KMB1 with no issues over the years. Often I swap work offsets back and forth multiple times to save on tool changes. Just the first time I've done it under PathPilot. I guess I'll find out. I just laid out a job that way for the 1100.
Bob La Londe
http://www.YumaBassMan.com