584,846 active members*
3,856 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Hobbycnc (Products) > okuma lb15 wilt osp5000 moves only in one direction
Results 1 to 2 of 2
  1. #1
    Join Date
    Nov 2009
    Posts
    30

    okuma lb15 wilt osp5000 moves only in one direction

    Dear friends,

    I have a cnc okuma lb15 with osp5000 controller, when i try to jog the cnc the z axes moves in both directions but the x axes moves only in one direction.
    the machine is not showing any errors on the controller or on the driver, but the x axes only moves in the negative direction?

    what may cause this and how can i fix it

  2. #2
    Join Date
    Mar 2020
    Posts
    13

    Re: okuma lb15 wilt osp5000 moves only in one direction

    Hi. We have the same problem. Were you able to solve this?

Similar Threads

  1. LB15 OSP5000 CPU error
    By geeserteg in forum Okuma
    Replies: 17
    Last Post: 12-22-2020, 10:41 PM
  2. Replies: 13
    Last Post: 08-16-2016, 10:52 AM
  3. OKUMA OSP5000
    By neko911 in forum Okuma
    Replies: 6
    Last Post: 03-04-2012, 03:21 PM
  4. LB15 with OSP5000 monitor
    By geeserteg in forum Okuma
    Replies: 14
    Last Post: 12-09-2009, 11:20 PM
  5. Okuma Osp5000
    By hien100881 in forum G-Code Programing
    Replies: 3
    Last Post: 11-28-2007, 05:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •