584,850 active members*
4,324 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Gecko Drives > Using relay w/ G540 - 5v or 36v coil
Results 1 to 5 of 5
  1. #1
    Join Date
    Aug 2009
    Posts
    119

    Using relay w/ G540 - 5v or 36v coil

    New to electronics, and I want to use relays to turn on my router motor and dust collector. My power supply outputs 36v and 5v, wondering if there is any reason to get a relay with 5v coil or 36v coil?

    I'm looking at a T9AP1D52-36-01 relay, is this a good choice?

  2. #2

    Re: Using relay w/ G540 - 5v or 36v coil

    It looks to me like that relay would work. Stick with 36v if you have that power supply. Otherwise you end up like me with 4 different power supplies in my case.

  3. #3
    Join Date
    Aug 2009
    Posts
    119

    Re: Using relay w/ G540 - 5v or 36v coil

    Thanks for the reply.

    I actually have both 5v and 36v on the oem power supply of my Techno Davinci router, was just wondering if there was a reason to use one over the other,

  4. #4
    Join Date
    Mar 2007
    Posts
    2083

    Re: Using relay w/ G540 - 5v or 36v coil

    why not a 48V relay ?

    then you can use the G540's 48V supply

    what are you controlling with the relay ?

    John

  5. #5
    Join Date
    Aug 2009
    Posts
    119

    Re: Using relay w/ G540 - 5v or 36v coil

    I'm using 36v for the Gecko, could use that for the relays.

    Controlling router motor and dust collector

Similar Threads

  1. G540, Relay Board and VFD
    By ZJGardner in forum Gecko Drives
    Replies: 1
    Last Post: 03-28-2020, 08:05 AM
  2. VFD P24 to G540 using a Relay
    By district7 in forum Spindles / VFD
    Replies: 4
    Last Post: 04-25-2015, 06:56 PM
  3. Relay coil Question
    By Bird_E in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 01-04-2010, 10:10 PM
  4. Gecko G540 Relay Help
    By The CNC Man in forum Stepper Motors / Drives
    Replies: 2
    Last Post: 12-03-2009, 11:11 PM
  5. G540 and cnc4pc C8 relay
    By blackrat in forum Gecko Drives
    Replies: 0
    Last Post: 04-22-2009, 03:03 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •