506,007 active members
4,238 visitors online
Register for free
Results 1 to 2 of 2
  1. #1
    Join Date
    Aug 2019

    Need some input

    Any advise please,
    I have a AZYXS 5010 couple years new. We cut .25 Aluminum sheets. We also engrave logos and text. The problem we are having is that the surface does not seam to be flat. It will be ingraving along fin3 and suddenly miss or barley touch the surface. We adjust height back up and engrave the missing part. Then it continues on engraving deeper than desired. Is there a wavy surface on the aluminum? Can we order material that would be more suited to our needs? We resurface the spoil board daily.

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003

    Re: Need some input

    Sounds like there may be some play in your Z axis.

    UCCNC 2017 Screenset

    Mach3 2010 Screenset

    JointCAM - CNC Dovetails & Box Joints

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts