502,551 active members
6,019 visitors online
Register for free
Login

Thread: Overplunging

Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2019
    Posts
    1

    Overplunging

    Greetings:

    I was using a Gerber CNC mill, the spindle is a Makita router, the CNC is handled by Mach3 and the GCode obtained from Vectric Cut 3d, with a 1mm stepp per sweep, the machine had its Zaxis stepper changed recently.
    As it was rough pathing a block of MDF and little over half of the work done, the z axis failed to raise properly, and seemed to actually dive deeper than programmed (about 3 mm instead of 1) each time it had to descend.
    I am new to this job but the people here say the machine has done this before.
    I would appreciate any guidance towards finding out how to fix this.
    Thank you

  2. #2
    Member
    Join Date
    Aug 2019
    Posts
    1
    Thank you so much for your informations.
    Ruby888
    Gclub Slot

  3. #3
    Member
    Join Date
    Aug 2019
    Posts
    1
    The different advances that should be pursued at the season of composing a medium-term article have been featured underneath:

    Monitoring the time, when the paper subject will be gotten

    The foundation required for accepting the subject, looking into on the issue and finishing the paper should be kept prepared

    Arranging the way toward composing from previously will guarantee the quicker culmination of the paper inside the due dates

    Soaking up the nature of good correspondence aptitude and jargon can empower the understudies to pick up mastery in inquiring about just as conveying the paper inside due dates

    Good karma with your expositions and deal with yourself law essay.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •