502,551 active members
5,926 visitors online
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Centroid CNC Control Products > Acorn/Beagle Board Green. GROVE I2C output for i/o expansion
Results 1 to 8 of 8
  1. #1
    Registered
    Join Date
    May 2016
    Posts
    6

    Acorn/Beagle Board Green. GROVE I2C output for i/o expansion

    Any possible ideas on how to map variables to this expansion. Any thoughts on when factory expansion software/hardware may become available ?

  2. #2
    Registered
    Join Date
    Jul 2011
    Posts
    185

    Re: Acorn/Beagle Board Green. GROVE I2C output for i/o expansion

    From what I can recall its overdue for release so anytime. Centroid has its own support forum specifically for the acorn. I would ask questions there. You are more likely to get a response.

  3. #3
    Registered
    Join Date
    Aug 2016
    Posts
    10

    Re: Acorn/Beagle Board Green. GROVE I2C output for i/o expansion

    Quote Originally Posted by FritziAnn View Post
    Any possible ideas on how to map variables to this expansion. Any thoughts on when factory expansion software/hardware may become available ?
    Grove is a Seeed Studio thing. It is not supported by Centroid firmware.

  4. #4
    Registered
    Join Date
    May 2016
    Posts
    6

    Re: Acorn/Beagle Board Green. GROVE I2C output for i/o expansion

    Thanks

  5. #5
    Registered
    Join Date
    May 2016
    Posts
    6

    Re: Acorn/Beagle Board Green. GROVE I2C output for i/o expansion

    I have tried to Join that group, but i assume my account was not processed due to not owning the acorn product. I tried everything in the application.

    Thanks, Steve

  6. #6
    Registered
    Join Date
    Jul 2011
    Posts
    185

    Re: Acorn/Beagle Board Green. GROVE I2C output for i/o expansion

    Must be some sort of error. I don't think they care on the centroid acorn site if you have one of their products or not. I joined before I had one. What part of Canada are you in?

  7. #7
    Registered
    Join Date
    May 2016
    Posts
    6
    Vancouver Island



    Quote Originally Posted by upnorth View Post
    Must be some sort of error. I don't think they care on the centroid acorn site if you have one of their products or not. I joined before I had one. What part of Canada are you in?

  8. #8
    Registered
    Join Date
    Jul 2011
    Posts
    185

    Re: Acorn/Beagle Board Green. GROVE I2C output for i/o expansion

    Ok I was just curious. I live in the opposite side of the country now. I lived on the north end of your island years ago. I spent 2 years in Port Hardy. There is some sort of expansion board in the works for the acorn but not released yet. I'm quickly running out of inputs on mine.

Similar Threads

  1. Planet CNC Mk3/4 Output count expansion
    By lh-cnc in forum PlanetCNC
    Replies: 3
    Last Post: 01-03-2019, 11:25 AM
  2. Acorn relay board
    By Jknapp55 in forum Centroid CNC Control Products
    Replies: 1
    Last Post: 01-01-2019, 03:27 AM
  3. Output voltage from Output Board seems to be quite low?
    By cdfleischmann in forum PlanetCNC
    Replies: 2
    Last Post: 07-25-2018, 12:18 PM
  4. Mini Mill Running Acorn Board and Software
    By AMHKnives in forum Centroid CNC Control Products
    Replies: 2
    Last Post: 08-09-2017, 12:54 AM
  5. Chinese TB6560 driver green board
    By georgei in forum Stepper Motors / Drives
    Replies: 10
    Last Post: 12-24-2014, 08:45 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •