New to the CNC world. Have converted HF bench mill to CNC and rebuilt a Techno ISEL gantry but those were steppers.
In my travels I picked up a couple Yaskawa YSC-SGMPH-08-001 which appear to be about 1 hp 200V servos with a nice 20mm thru spindle.
Would love to just hook them up to see if they even work before going any further but have no idea where to start. . . .
Is that 200V ac or dc?
Can I use Mach4 and what do I need as far as BOB, controller, PS, etc
Thanks to all that contribute.
cncneon
Results 1 to 1 of 1
-
08-30-2019, 06:52 PM #1
- Join Date
- Aug 2018
- Posts
- 29
Yaskawa YSC-SGMPH-08-001 suggestions for testing
Reply With QuoteSimilar Threads
-
Changing drive inverter from Yaskawa G3 to Yaskawa f7
By pblack00 in forum MilltronicsReplies: 2Last Post: 10-08-2017, 09:37 PM -
Accuracy testing suggestions
By Teddyo in forum Chinese MachinesReplies: 1Last Post: 01-22-2017, 10:41 AM -
YASKAWA SGMGV-05A (450WATT) powered by servodrive YASKAWA SGDV-5R5A (750WATT)
By graupnerhansen in forum CNC Machine Related ElectronicsReplies: 1Last Post: 07-12-2016, 02:11 PM -
EDM Testing
By FanFan in forum EDM Discussion General TopicsReplies: 4Last Post: 07-28-2015, 06:49 AM -
Drag force testing m/c/Friction factor testing m/c/Rotational resistance testing m/c
By chaitanya2102 in forum Want To Buy...Need help!Replies: 0Last Post: 03-08-2011, 12:28 PM
Tags for this Thread
Posting Permissions
