584,805 active members*
4,913 visitors online*
Register for free
Login
Results 1 to 18 of 18

Hybrid View

  1. #1
    Join Date
    Apr 2018
    Posts
    24

    I need a manual for VFD ZONCN NZ200

    Hello everyone.
    I need a manual for VFD ZONCN NZ200.
    I wrote to the supplier. I wrote to the manufacturer and no one answered me.
    Can you help me please?
    Thanks Jirka

  2. #2
    Join Date
    Jan 2005
    Posts
    15362

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by jirkamm View Post
    Hello everyone.
    I need a manual for VFD ZONCN NZ200.
    I wrote to the supplier. I wrote to the manufacturer and no one answered me.
    Can you help me please?
    Thanks Jirka
    What is the manufactures name
    Mactec54

  3. #3
    Join Date
    Apr 2018
    Posts
    24

    Re: I need a manual for VFD ZONCN NZ200

    ZONCN
    Thanks

  4. #4
    Join Date
    Jan 2005
    Posts
    15362

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by jirkamm View Post
    ZONCN
    Thanks
    What do you need to know about it I don't have the manual but may be able to help
    Mactec54

  5. #5
    Join Date
    Apr 2018
    Posts
    24

    Re: I need a manual for VFD ZONCN NZ200

    Hello.
    I need to set - "device error" for relay output 1.
    Set to relay output 2 - "device on" output
    For analog output I need to set - output "Current frequency" - 0-10V.
    But it probably doesn't have an analog VDF output.


    Thank you

  6. #6
    Join Date
    Apr 2018
    Posts
    24

    Re: I need a manual for VFD ZONCN NZ200

    Next, I need to set to control the pump power with an external potentiometer.

  7. #7
    Join Date
    Jan 2005
    Posts
    15362

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by jirkamm View Post
    Next, I need to set to control the pump power with an external potentiometer.
    I need a clear photo of the low voltage terminals

    And no you would not use any of the relay output for a Pot

    Tell me what your VFD is being used for and what it is driving
    Mactec54

  8. #8
    Join Date
    Aug 2019
    Posts
    31
    Quote Originally Posted by jirkamm View Post
    Hello everyone.
    I need a manual for VFD ZONCN NZ200.
    I wrote to the supplier. I wrote to the manufacturer and no one answered me.
    Can you help me please?
    Thanks Jirka
    Hi, I have one, how to send it to you?

  9. #9
    Join Date
    Jan 2005
    Posts
    15362

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by CNCINDUSTRY View Post
    Hi, I have one, how to send it to you?
    You can attach it here, open a post, go to Advanced scroll down and attach a PDF File
    Mactec54

  10. #10
    Join Date
    Aug 2019
    Posts
    31
    Quote Originally Posted by mactec54 View Post
    You can attach it here, open a post, go to Advanced scroll down and attach a PDF File
    Awful,size limited.
    Do you need the wiring diagrams? Maybe later.
    Attached Thumbnails Attached Thumbnails SIZELIMITED.JPG   MANUAL SIZE.JPG  

  11. #11
    Join Date
    Apr 2018
    Posts
    24

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by CNCINDUSTRY View Post
    Awful,size limited.
    Do you need the wiring diagrams? Maybe later.
    Please send it to [email protected]. Max. 20Mb.
    Thanks
    Jirka

  12. #12
    Join Date
    Oct 2020
    Posts
    1

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by CNCINDUSTRY View Post
    Hi, I have one, how to send it to you?
    HiGood Day! I need the manual also, would it be possible for you to share it to me?

  13. #13
    Join Date
    Apr 2018
    Posts
    24

    Re: I need a manual for VFD ZONCN NZ200

    Hi.
    "And no you would not use any of the relay output for a Pot" (I don't understand this sentence)

    VFD is used to control the vacuum pump power for the vacuum table. I need to adjust the power with a potentiometer. When milling holes and grooves I need to increase performance. I meant to connect the potentiometer and pressure sensor in series.

    Thanks

  14. #14
    Join Date
    Jan 2005
    Posts
    15362

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by jirkamm View Post
    Hi.
    "And no you would not use any of the relay output for a Pot" (I don't understand this sentence)

    VFD is used to control the vacuum pump power for the vacuum table. I need to adjust the power with a potentiometer. When milling holes and grooves I need to increase performance. I meant to connect the potentiometer and pressure sensor in series.

    Thanks
    Not a very good photo the +10 AVI and Ground Terminals are what your Pot connects to AVI to the center Pot connection there is also a Jumper or switch that needs to be set J2 to AVI it is beside the terminal block

    There may be a Parameter to set also
    Mactec54

  15. #15
    Join Date
    Aug 2019
    Posts
    31
    Quote Originally Posted by jirkamm View Post
    Hi.
    "And no you would not use any of the relay output for a Pot" (I don't understand this sentence)

    VFD is used to control the vacuum pump power for the vacuum table. I need to adjust the power with a potentiometer. When milling holes and grooves I need to increase performance. I meant to connect the potentiometer and pressure sensor in series.

    Thanks
    Do you need to controll the VFD dynamically?Then you need a controller which has analog input and output module. Such as PLC.
    The potentiometer and pressure sensor connect to the controller's input terminals, and its output terminal connect to the VFD‘s analog input terminals.

  16. #16
    Join Date
    Apr 2018
    Posts
    24

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by CNCINDUSTRY View Post
    Do you need to controll the VFD dynamically?Then you need a controller which has analog input and output module. Such as PLC.
    The potentiometer and pressure sensor connect to the controller's input terminals, and its output terminal connect to the VFD‘s analog input terminals.
    Yes. I need to dynamically. I told the supplier that I needed it this way. The supplier said - ok.
    I see that I can throw away the VFD.
    Thanks

  17. #17
    Join Date
    Jan 2005
    Posts
    15362

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by jirkamm View Post
    Yes. I need to dynamically. I told the supplier that I needed it this way. The supplier said - ok.
    I see that I can throw away the VFD.
    Thanks
    Your VFD is not different from any other, I'm sure you could do what is needed if you get creative, your sensor would be controlled from your machine control and would output a voltage change to adjust the VFD Drives motor RPM as needed not hard to do at all
    Mactec54

  18. #18
    Join Date
    Apr 2018
    Posts
    24

    Re: I need a manual for VFD ZONCN NZ200

    Quote Originally Posted by mactec54 View Post
    Your VFD is not different from any other, I'm sure you could do what is needed if you get creative, your sensor would be controlled from your machine control and would output a voltage change to adjust the VFD Drives motor RPM as needed not hard to do at all
    It is true. I will have linuxcnc and Beckhoff EL3064 and EL4004 there. That could work.
    Good idea.
    Thanks

Similar Threads

  1. Replies: 0
    Last Post: 08-06-2018, 05:45 AM
  2. Colchester 3000l maintenance manual, parts manual
    By jaqn in forum Colchester Tornado lathes
    Replies: 1
    Last Post: 11-17-2017, 02:41 PM
  3. Replies: 0
    Last Post: 03-18-2016, 10:55 PM
  4. For Sale Complete Maho MH 600E Manual, + Philips 432 Programming Manual
    By HKgunslinger in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 2
    Last Post: 03-08-2012, 08:09 AM
  5. Replies: 0
    Last Post: 06-17-2010, 12:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •