584,808 active members*
5,362 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Mori Seiki Machines > Mori Seiki Mills > Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?
Results 1 to 6 of 6

Threaded View

  1. #1
    Join Date
    Aug 2019
    Posts
    2

    Mori Seiki MV-40M Way Cover Size? And Wiper/ Plastic in back?

    I need to know the proper dimensions for the Mori Seiki MV-40M front Way Cover. I need to replace it but cannot take it off the machine for down time. I know it's 36" width with 5 pieces/ slides to it.

    Also the back plastic piece at the bottom of the backplate is about 62" in width and I don't know what it's purpose is but it's there and it's brittle and cracked so I need to replace it but don't know the exact dimension in length. It's bolted on there.

    If somebody could give me exact dimensions for these 2 things I would be very thankful.
    Last edited by JimmyHendrix; 08-16-2019 at 12:12 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •