507,943 active members
2,485 visitors online
Register for free
Login
Results 1 to 4 of 4
  1. #1
    Registered
    Join Date
    Jan 2018
    Posts
    320

    UCCNC400ETH & Mach3?

    Noob question.
    Anyone using this combination of UCCNC400 & Mach3?
    I've seen a plugin for it but is the setup stable?

    Should I just go with the ESS Smoothstepper and not look at anything else when the time comes?

  2. #2
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Posts
    34568

    Re: UCCNC400ETH & Mach3?

    It should be just as stable as the ESS.
    I'd recommend the AXBB-E. It has more features, and you don't need a breakout board.
    I'd also pay the $60 and switch to UCCNC, which is far superior to Mach3.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  3. #3
    Registered
    Join Date
    Jun 2015
    Posts
    871

    Re: UCCNC400ETH & Mach3?

    Quote Originally Posted by dazp1976 View Post
    Noob question.
    Anyone using this combination of UCCNC400 & Mach3?
    I've seen a plugin for it but is the setup stable?

    Should I just go with the ESS Smoothstepper and not look at anything else when the time comes?
    I used that combination for some time and it worked fine, but then moved to UCCNC.

  4. #4
    Registered
    Join Date
    Aug 2015
    Posts
    100

    Re: UCCNC400ETH & Mach3?

    Uccnc is better than mach 3 .
    I wolud not use mach 3 after i use uccnc .

Similar Threads

  1. Mach3, 2010 Screenset, Mach3, G540, UC100, Win 10 - Will not home
    By SteveS in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 04-25-2019, 05:49 PM
  2. Novusun NVUM USB MACH3 Card with dq860ma setup Mach3 doesnt turn Nema23
    By adamfromUK in forum General Off Topic Discussions
    Replies: 0
    Last Post: 12-24-2017, 04:47 PM
  3. To mach3 or not mach3, opinions requested
    By KenCameron in forum HURCO
    Replies: 13
    Last Post: 10-07-2014, 10:05 PM
  4. Differences Between Mach3 Mill and Mach3 Plasma?
    By cjjonesarmory in forum Mach Plasma / Laser
    Replies: 0
    Last Post: 11-18-2010, 04:12 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •