585,690 active members*
4,905 visitors online*
Register for free
Login

Thread: VMC 760 HOMING ISSUE

Results 1 to 2 of 2
  1. 08-21-2019, 09:14 PM #1
    laserh20
    laserh20 is offline Registered
    Join Date
    May 2009
    Posts
    27

    Exclamation VMC 760 HOMING ISSUE

    Bridgeport VMC760 will not home in z axis. It goes up passes the limit and then stops. The maintenance page shows that the limit switch is working properly. The parameters are set correctly. Cannot for the life of me figure out why this thing won't go home. Help!!!!
    Reply With Quote Reply With Quote
  2. 08-21-2019, 09:38 PM #2
    Mecanix
    Mecanix is offline
    Join Date
    Aug 2019
    Posts
    339

    Re: VMC 760 HOMING ISSUE

    Assuming a mechanical switch; use a DMM to test if that limit switch is operational and signal when triggered. If not (I suspect), replace the switch (suggest replacing all of them).
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Homing Issue
    By kreativjustin in forum Fadal
    Replies: 2
    Last Post: 08-11-2018, 01:27 PM
  2. MH-400 ATC Homing issue
    By mikenboys in forum Maintenance DIY Discussion
    Replies: 1
    Last Post: 06-04-2014, 04:45 PM
  3. Mach 3 homing issue.
    By evo4wrx in forum CNC Machine Related Electronics
    Replies: 2
    Last Post: 07-10-2010, 03:04 PM
  4. Homing Issue
    By Moondog in forum Machines running Mach Software
    Replies: 3
    Last Post: 07-30-2006, 04:23 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules