The Fanuc 15M CRT is pretty dim and burned in. Still works but I figured I'd replace it with an LCD for better clarity. I ordered one off ebay that said it was compatible will all 9" CRT screens. Of course I ordered the cheapest one ($170). It arrived today. Plugged it in and all I get is a flickering black screen. OSD works so I know the monitor works. If I unplug the honda connector the OSD is stable, with it connected it appears and disappears quickly due to the signal. So I get out a mirror and discover my CRT is a A61L-0001-0092 and the new LCD is marked A61L-0001-0093. Is there a frequency and/or cabling difference between the A61L-0001-0092 and A61L-0001-0093?

Doing some investigation it appears the monitor I purchased is this one:
FANUC A61L-0001-0093 LCD monitor

It also appears that aiderry (the manufacturer) has a model specific to the 0092.
FANUC A61L-0001-0092

Rather than shipping it back to HK I might just swap the converter board if I can source one easily. Any ideas?