584,812 active members*
5,484 visitors online*
Register for free
Login
Results 1 to 4 of 4
  1. #1

    TNC 355 B - PLC program

    Hello All,

    Can anyone share the PLC program and PLC parameters for a Kasuga Milling Machine RC-850?

    Thank you in advance.

    Bertrand

  2. #2
    Join Date
    Apr 2020
    Posts
    1

    Re: TNC 355 B - PLC program

    I used to write the PLC programs for these machines for the importer in melbourne. If you can send me some contact details i should be able to help you either with the original PLC program or an alternative one. Where are you located?

  3. #3
    Join Date
    Jan 2020
    Posts
    4

    Re: TNC 355 B - PLC program

    Hello All,

    Can anyone share the PLC program and PLC parameters for a SWH UF41 HDH TNC355b 1991year of construction?

    Thank you in advance.

    Vladimir

  4. #4
    Join Date
    Dec 2006
    Posts
    14

    Re: TNC 355 B - PLC program

    Hi there, I have a similar problem, lost the PLC program after the 24v power supply failed. batteries had low voltage and didnt save it. Its a kasuga TC-100 with heidenhain TNC415b controller, has tool changer, was originally sold to Trico by Internation Machine Tools. IMT.
    in the early 90's. Any help is welcome. contact me at [email protected] . Cheers,

Similar Threads

  1. Steps to develop VB program to read CNC (G-code) program.
    By BhushanM01 in forum Visual Basic
    Replies: 7
    Last Post: 12-12-2017, 07:57 PM
  2. program of tab program in mori sv 400 and program tool chance
    By hmtam1311 in forum Mori Seiki Mills
    Replies: 0
    Last Post: 12-10-2017, 02:54 PM
  3. Replies: 1
    Last Post: 02-11-2015, 02:38 AM
  4. Replies: 4
    Last Post: 03-06-2013, 07:56 PM
  5. Replies: 0
    Last Post: 12-27-2010, 09:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •