509,738 active members
2,990 visitors online
Register for free
Login
IndustryArena Forum > CAD Software > Logic Trace CNC/DXF > tracing an elk detailed diagram
Results 1 to 1 of 1
  1. #1
    Registered
    Join Date
    Oct 2007
    Posts
    763

    tracing an elk detailed diagram

    digitizing a full sized intarsia diagram
    traced out an elk standing in a marsh to produce a *dxf file to
    engrave it on a CO2 laser

    https://youtu.be/kgciGKQyygI
    Attached Thumbnails Attached Thumbnails elk3.jpg   elk5.jpg  

Similar Threads

  1. VMC-200 Any one have detailed info on them
    By cnctoolman in forum EMCO CNC machines
    Replies: 0
    Last Post: 10-19-2017, 11:06 PM
  2. Wanted ProtoTrak Plus Power Supply Amplifier detailed wiring diagram or spec sheet
    By Solidworks4u in forum Machinery Manuals / Brochures
    Replies: 1
    Last Post: 07-16-2016, 01:48 PM
  3. tracing out an old diagram in a grid pattern
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 03-23-2014, 03:17 PM
  4. Looking for a detailed G code primer.
    By maspeir in forum DIY CNC Router Table Machines
    Replies: 24
    Last Post: 12-27-2010, 04:55 PM
  5. SX3, X4+ Lubrication Detailed Installation.
    By neilw20 in forum Syil Products
    Replies: 9
    Last Post: 10-28-2008, 06:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •