Originally Posted by
ger21
Not familiar with Galaad, but it appears to be CAD/CAM?
You need to use UCCNC or Mach3 to control the machine with the UC100. (UCCNC is cheaper and much better)
Galaad should export g-code that can be used with Mach3 or UCCNC.
EDIT: Reading a little more, it looks like Galaad can also control machines? The website is not clear on how it does this, but it will not be able to control a machine through the UC100.
But again, you can use Galaad created g-code in UCCNC with the UC100.