I have an Automated Precision Equipment 200HD that has a rotary axis. I am using Aspire 9.510 and Win.cnc. I have run a "rounding toolpath," and been successful. However, when following the Aspire videos for text wrapping, my machine constantly cuts too deep. With a setting of .125", I'll get a .50" cut. I am z-zeroed on the center of the rotary axis as is suggested, but I've also tried from the cylinder surface, and get the same results! I am new to this aspect of my machine, and have had other issues, but this is stopping me cold!
Any suggestions?

Thanks

Steve Weaver
Sign Fabricator
Dollywood Theme Park