584,817 active members*
4,804 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Uncategorised MetalWorking Machines > Trumpf Trumatic 260Rotation - error message
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2019
    Posts
    4

    Trumpf Trumatic 260Rotation - cannot find reference point

    Hello,

    recently we bought used Trumatic 260 Rotation. After assembling it normally found the reference point. Several times without any problem. However last week after starting of the reference point process the machine moved with the main table to the front and with X axes to the right. Then it stopped work.
    We manually pushed the X and Y approx. to the central position.

    Now when we press start for the reference point process it only moves with the punching head slightly up and down and nothing more. No error messages.

    No move either in X nor in Y direction.

    Any help with this old machine?

    Thanks for any suggestion.

    Ladislav
    Last edited by Ladis666; 09-11-2019 at 04:31 PM.

  2. #2
    Join Date
    Dec 2019
    Posts
    3
    Check your limit switch and be sure no clamp in dead area. Is a clamp is so close head the machine won’t move to avoid crashes

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •