504,144 active members
2,724 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Updated post from X4 to 2018: next tool call up gone
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jun 2010
    Posts
    23

    Updated post from X4 to 2018: next tool call up gone

    What do I need to change in the post to get it back?

  2. #2
    Registered
    Join Date
    Jun 2011
    Posts
    21

    Re: Updated post from X4 to 2018: next tool call up gone

    Click the MACHINE tab. Then select Control Definition. Then select Tool. Then check the box marked "Enable Staged Tool Routines". Check the box at the bottom of the page. Reply YES to the prompt. You are done.

Similar Threads

  1. How to override tool call and tool change?
    By PRINT_FX in forum Mastercam
    Replies: 9
    Last Post: 05-29-2012, 09:11 PM
  2. Tool Call???
    By kraestig in forum HEIDENHAIN -> TNC
    Replies: 1
    Last Post: 01-22-2012, 06:34 PM
  3. tool call
    By suemi in forum HEIDENHAIN -> TNC
    Replies: 4
    Last Post: 01-07-2012, 06:01 AM
  4. TOOL CALL
    By Hans-Michael in forum HEIDENHAIN -> TNC
    Replies: 1
    Last Post: 08-16-2011, 05:57 PM
  5. x5 updated tool library problem
    By coykiesaol in forum Mastercam
    Replies: 1
    Last Post: 11-23-2010, 10:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •