584,814 active members*
5,331 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Feb 2005
    Posts
    116

    Mini Dell Computer , Lost the Mach 3 license

    I purchased a mini Dell computer and monitor from CNC4pc. several years ago. We had some problems with
    unit losing the software and sent it back for repair.
    Never used it until now as we had a spare unit so wound up shelving it as a backup.
    Went use the computer and found that Mach3 had been loaded on the machine and will only
    run in demo mode. Is the license on the unit ?
    Do I have to buy another license ?

    Thank you

  2. #2

    Re: Mini Dell Computer , Lost the Mach 3 license

    In Mach3 the license is not associated to the PC, but the installation. You just need to copy the license back into the Mach3 root directory. If you do not have the license, open a ticket in the cnc4pc and it will be sent to you again.

    Arturo Duncan
    https://cnc4pc.com

  3. #3
    Join Date
    Feb 2005
    Posts
    116

    Re: Mini Dell Computer , Lost the Mach 3 license

    Thank you for your response Arturo.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •