584,800 active members*
4,518 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Dyna Mechtronics > Dyna Myte DM2800 Retrofited Control & Axis Drives
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2010
    Posts
    24

    Dyna Myte DM2800 Retrofited Control & Axis Drives

    Attachment 426952
    Following some of the other build threads on here I managed to get my DM2800 running!
    I'm using:
    • Mach3 version 3.043.062
    • Warp9 Ethernet SmoothStepper
    • Gecko G540
    • IBM Pentium 4 PC

    Wiring Schematic with markups:
    Attachment 426928

    P852 Stepper Motor to G540 DB9 Pinouts:
    Attachment 426930

    What the control cabinet looked like when I started:
    Attachment 426942

    Overview of the control cabinet finished:
    Attachment 426944

    ESS mounted where the old Distribution Board mounted using existing holes:
    Attachment 426946

    Gecko G540 mounted to original drive brackets:
    Attachment 426948

    120 mm fan attached below G540 using original drive brackets and fender washers:
    Attachment 426950

    Link to a YouTube video of it running:
    https://youtu.be/cSbDXxkNvPw

    I'm out of room for attachments so I'll make another post with more detail including the Mach3 configurations.
    Steve

  2. #2
    Join Date
    Apr 2010
    Posts
    24

    Mach3 Configurations:

    I just realized the replies display before the original post so please page down.

    General Configuration:
    Attachment 426954

    Home / Limits
    Attachment 426956

    Input Signals 1/2:
    Attachment 426958

    Input Signals 2/2:
    Attachment 426960

    Motor Outputs:
    Attachment 426962

    Motor Tuning (X, Y, & Z are all the same):
    Attachment 426964

    Output Signals:
    Attachment 426966

    Spindle Setup:
    Attachment 426968

Similar Threads

  1. Replies: 20
    Last Post: 10-18-2019, 09:41 PM
  2. Dyna Myte 2800 ( DM2800 ) For sale
    By Super98 in forum Dyna Mechtronics
    Replies: 1
    Last Post: 06-29-2019, 12:52 AM
  3. Dyna Myte DM3000 control parts
    By Marty_Escarcega in forum Dyna Mechtronics
    Replies: 2
    Last Post: 04-07-2019, 05:44 AM
  4. Dyna-Myte DM2800 Belts
    By BobMorside in forum Dyna Mechtronics
    Replies: 0
    Last Post: 12-08-2016, 02:54 PM
  5. Fanuc drives retrofited
    By precourt in forum CamSoft Products
    Replies: 4
    Last Post: 02-07-2007, 06:26 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •