How do I turn this parameter off? And what is the name of this parameter? Its an OSP-P200LA control on a lathe. We robotic load and unload on this lathe and if its on the offset screen, it will not automatically cycle start.
Thanks
How do I turn this parameter off? And what is the name of this parameter? Its an OSP-P200LA control on a lathe. We robotic load and unload on this lathe and if its on the offset screen, it will not automatically cycle start.
Thanks
hi, i also learned this trick here, on the forum, from mr wizard : bit 6.0 = 1 , cycle start enabled in other than operation mode / kindly
Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg