584,814 active members*
5,209 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Need Help. Stuck in MDI mode. Can't change programs.
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2019
    Posts
    2

    Need Help. Stuck in MDI mode. Can't change programs.

    Hi.

    We have a Hyundai Kia 21skt with fanuc oi-tc. Everything was working fine until a program got to a certain block that it refused to do anything on. Had to stop the spindle zero return and now I can't execute the program at all. I can't change to another program. I can edit three other programs in background but vanity load them. I can run mdi commands and the turret rotates and moves on a and x axis. I can't edit the foreground program. It's as if the machine thinks it still needs to finish where it left off on the currently loaded program but it won't do anything. Also when the z axis is returning to home (machine zero) it no longer slows down for the last couple inches before 0.0. X still does.

    Thanks.

  2. #2
    Join Date
    May 2016
    Posts
    526
    What did it stop on?
    Tried to message you direct but won't allow it

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •