584,802 active members*
4,939 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Pega 344 Amada Fanuc 6M electrical diagram
Results 1 to 18 of 18
  1. #1
    Join Date
    Jun 2007
    Posts
    14

    Pega 344 Amada Fanuc 6M electrical diagram

    I have a used turret punch machine.
    It's Amada Pega344 with Fanuc 6M model B controller.
    It's trouble with many alarms because the mice attack the wire.
    Pls help me Electrical diagram for me to connect wire.
    Thank alot

  2. #2
    Join Date
    Oct 2008
    Posts
    1
    Hello, Sorry, but i cant to help you, my problem is some yours, my vendor go away with all information about it (the money too) and I cant to put it work.

    I'll continue to seek. Thanks

  3. #3
    Join Date
    Aug 2008
    Posts
    403
    what wires are cut / I have drawing for 6m control but it is for a wire edm

  4. #4
    I have the drawings for the Pega 357 and 345 with the Fanuc 6 control
    I am not sure how close the wiring will be to your machine.
    Send me your email address if you want me to send them

  5. #5
    Join Date
    Sep 2007
    Posts
    371
    Try contacting Amada directly, they have manuals for sale.

    GP.

  6. #6
    Join Date
    Sep 2010
    Posts
    0
    thank you

  7. #7
    Join Date
    Oct 2010
    Posts
    0

    amada 344

    I need the electrical diagram of a beloved 344, or information you have, I think it should be similar to the 345.
    Please if you have something you can send me [email protected]
    thanks


    Quote Originally Posted by cncdiag View Post
    I have the drawings for the Pega 357 and 345 with the Fanuc 6 control
    I am not sure how close the wiring will be to your machine.
    Send me your email address if you want me to send them

  8. #8
    Join Date
    Nov 2010
    Posts
    0
    Quote Originally Posted by cncdiag View Post
    I have the drawings for the Pega 357 and 345 with the Fanuc 6 control
    I am not sure how close the wiring will be to your machine.
    Send me your email address if you want me to send them
    hi there, i have a issue with a pega 357 (1990) could you send me a copy of the electrical drawings you have, the machine i'm working on should have the TCU (a) board, i have the drawings for the TCU (b) relay board but the machine i'm on has been fitted with the TCU (C) relay board. ahhhh nightmare!
    many thanks
    Paul
    [email protected] .uk

  9. #9
    Join Date
    Oct 2011
    Posts
    0
    Hellow, I have Wediemann W4560 model MURATA WARNERS SWASEY Co JAPAN CNC turret punch machine,Mfg date 1986. In this machine facing some electrical problem, I need wiring diagram of FUNUC 6M control panel. Requesting you to send us on this email [email protected].

    By Veeresh

  10. #10
    Join Date
    Apr 2010
    Posts
    0
    HI CNCDIAG
    I need the electrical diagram and ladder diagram of amada pega 345 fanuc 6M, if you have it,
    Please if you have something,can you send to me it.
    thank you very much , my email :[email protected]
    good bye

  11. #11
    Join Date
    Apr 2013
    Posts
    0
    If anyone could pass along the drawings for the Pega 357 with Fanuc 6 control it would be greatly appreciated. I'm trying to locate a part number for what I believe is a Fanuc cable (20 pin Honda to 17 pin Cannon connector - both female), which connects Motor A06B-0616-B383-R to MotherBoard A16B-1000-0030/06C
    Email: [email protected]

  12. #12
    Join Date
    Oct 2005
    Posts
    89

    Re: Pega 344 Amada Fanuc 6M electrical diagram

    hi guys ,
    are you still looking for support for your machines...?
    let me know.

    thanks.

  13. #13
    Join Date
    Oct 2016
    Posts
    22

    Re: Pega 344 Amada Fanuc 6M electrical diagram

    [email protected]
    Pretty please, with magic beans on, can you send it to me? I thought it was classified information!

  14. #14
    Join Date
    Oct 2005
    Posts
    89

    Re: Pega 344 Amada Fanuc 6M electrical diagram

    Quote Originally Posted by cncdiag View Post
    I have the drawings for the Pega 357 and 345 with the Fanuc 6 control
    I am not sure how close the wiring will be to your machine.
    Send me your email address if you want me to send them
    hi cncdiag

    can you please send me the electrical drawings for Pega 357 and 345 with ( Fanuc 6 m control )

    [email protected]

    thanks.

  15. #15
    Join Date
    Nov 2015
    Posts
    1

    Re: Pega 344 Amada Fanuc 6M electrical diagram

    can you please send me the electrical drawings for Pega 357 and 345 with ( Fanuc 04pc control )

  16. #16

    Re: Pega 344 Amada Fanuc 6M electrical diagram

    need the electrical diagram of pega357,
    Please if you have something you can send [email protected]
    thanks

  17. #17
    Join Date
    Dec 2022
    Posts
    1

    Re: Pega 344 Amada Fanuc 6M electrical diagram

    hello, we would also need an electrical diagram for the pega 357. the voltage for the Solenoid valve for the hammer blow does not reach 24V. only reaches 11V. mail [email protected] thank you

  18. #18
    Join Date
    Feb 2024
    Posts
    0

    Re: Pega 344 Amada Fanuc 6M electrical diagram

    can you send it for me [email protected]

Similar Threads

  1. Replies: 5
    Last Post: 12-22-2019, 03:46 PM
  2. Amada pega fanuc 04pc system error
    By cndcnd in forum Fanuc
    Replies: 42
    Last Post: 10-10-2018, 04:47 PM
  3. Amada Pega 244 electrical circuit diagrams needed
    By Ramage in forum Machinery Manuals / Brochures
    Replies: 1
    Last Post: 06-29-2016, 07:58 PM
  4. Replies: 2
    Last Post: 09-29-2015, 04:02 PM
  5. Replies: 10
    Last Post: 08-10-2011, 10:14 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •