Hi guys/girls.

Been trawling through the minefield of Nema23 steppers and think I've narrowed it down to 2.
Would like your feedback on which to go for.
Will be running the drivers on 60V DC.

Motor 1:
https://www.cnc4you.co.uk/Stepper-Mo...H401-03-Nema23
8 wire used Bipolar in parallel:
Torque 4nm (566oz/in)
Voltage 2.8V
Amps 4.0A
Resistance 0.7
Inductance 3.0

Motor 2:
https://www.cnc4you.co.uk/Stepper-Mo.../60HS111-4204F
4 wire
Torque 4.5nm (637oz/in)
Voltage 4.2V
Amps 4.2A
Resistance 1.0
Inductance 4.5

Can't decide myself on this because: Are the higher inductance & resistance figures on motor 2 worth the extra torque compared with motor 1?.

It's for X,Y on a PM25 size machine, direct driven 1605 screws, no reduction pulleys/belts.

Thanks.