Hi all
I brought a esab table
With servo motor- gearboxes
The controls is too old, still working on floppy disc,
I have Mach 3 and stepper motors on our own table,
Could I put Mach 3 onto the esab table and use the existing servo motor-gearboxes.
It would be good if I could as these are good strong heavy gearboxes,
I just don't know anything about servo and what is needed to drive them,

The motors on esab table are,,
SCT
type. M642/T
NR 9804735
M642-1340-1208-07 TPZ
004.639.093 X 0PZ
Datum 1998

Anything else I would need to find out if these motors would work