584,802 active members*
4,994 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2019
    Posts
    1

    Question Newbie Help Cincom C16 Type 9 Controller Stuck

    Thank you in advance for any suggestions.

    I am helping my shop with this issue. The controller is stuck at the boot / BIOS screen. The battery was replaced and the screen is asking for an F1 or F10.

    CARD-PC Version : PC011-A
    301 - Keyboard error
    032304 KB Ok
    161 - Real TimeClock has lost power
    (Run setup)
    162 - System options not set
    (Run setup)
    04/00

    The Mitsubishi controller is labeled FCA635LCCH. This appears to be a standard controller for this CNC.

    Thank again for any help.

    -Kevin

  2. #2

    Re: Newbie Help Cincom C16 Type 9 Controller Stuck

    Hi Kevin,

    I have the exact same problem with an M16, could you solve it?

    -Ruedi

Similar Threads

  1. Need help! Cincom citizen L16 type 1
    By Bryant_Aguilera in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 12-31-2014, 05:23 PM
  2. newbie first cnc setup and stuck HELP!
    By school sweeper in forum LinuxCNC (formerly EMC2)
    Replies: 9
    Last Post: 04-04-2013, 03:18 AM
  3. Want to buy used CITIZEN Cincom L20E Type IX (L720EIX)
    By MarcvonAmsberg in forum Want To Buy...Need help!
    Replies: 0
    Last Post: 09-13-2011, 09:47 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •