531,917 active members*
3,199 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Okuma > Coolant in tool changer oil - GENOS 560 V
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Sep 2019
    Posts
    1

    Coolant in tool changer oil - GENOS 560 V

    The tool changer gearbox oil is being contaminated by coolant. Have replaced the O ring around the plug on the side facing the spindle. Coolant is still getting in. Okuma say they have not seen it before and can offer no suggestion.
    Anyone here seen it before?

  2. #2
    Member
    Join Date
    Jun 2015
    Posts
    3219

    Re: Coolant in tool changer oil - GENOS 560 V

    hi, please share a photo with all your pullstud types; it may be an o-ring issue, that may lead to spindle - burn

    i have seen this before, and finding this issue took months; i don't know if this is also your case, but i recomaned looking into this / kindly
    Ladyhawke - My Delirium, https://www.youtube.com/watch?v=X_bFO1SNRZg

  3. #3
    Registered
    Join Date
    Apr 2006
    Posts
    68

    Re: Coolant in tool changer oil - GENOS 560 V

    Tool changer gearbox vs o-ring in side facing of spindle. What does it mean?


    Sent from my iPhone using Tapatalk

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •