According to some recent email from Alibre and comments on their forum, it looks like Alibre 10 (Expert & above only) will come with "Alibre CAM" which appears to be some version of Mecsoft's Visual Mill CAM software.
Has anyone here heard any more about it?
Mike
Results 1 to 3 of 3
-
06-14-2007, 05:13 AM #1
Gold Member
- Join Date
- Jun 2006
- Posts
- 3063
Alibre CAM coming in Alibre Expert 10
-
06-15-2007, 05:35 AM #2
Registered
- Join Date
- Oct 2005
- Posts
- 859
Some info on Aibre forum
http://www.alibre.com/forums/viewtop...&highlight=cam
-
06-16-2007, 07:57 PM #3
Gold Member
- Join Date
- Jun 2006
- Posts
- 3063
tj,
It looks like Alibre CAM = Visual Mill Basic 5, with the possibility of an upgrade to full VM6.
That's good news for me as I've been meaning to try out Visual Mill but was concerned about the demo time limit since my day job keeps me pretty busy. Apparently Alibre CAM will be a perpetual license, unlike the current CAM options for Alibre.
Mike
Reply With QuoteSimilar Threads
-
Alibre/ Alibre xpress
By moyesboy in forum Uncategorised CAD DiscussionReplies: 11Last Post: 01-25-2006, 09:41 PM -
Is anyone using Alibre?
By cncadmin in forum Uncategorised CAD DiscussionReplies: 35Last Post: 11-02-2005, 04:02 AM -
Alibre anyone?
By WOLOG in forum Uncategorised CAM DiscussionReplies: 8Last Post: 08-27-2005, 08:44 PM -
Alibre questions
By Idle hands in forum Uncategorised CAM DiscussionReplies: 3Last Post: 05-03-2005, 02:18 PM -
Onecnc and Alibre
By brtlatjgt in forum OneCNCReplies: 15Last Post: 02-16-2005, 02:04 AM
Posting Permissions
