518,289 active members
2,691 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Sep 2019
    Posts
    6

    Question Help with G-code generation

    Hi, we bought a VMC 1050 with 5 axis recently and we would like to generate G-code in mastercam but there is no profile for this machine in the software (neither in camworks or hsmwork) so I was wondering if anyone could give me advice about which profile would be compatible with the vmc 1050 and wich postprocessor.
    Any help would be apreciated

  2. #2
    Registered
    Join Date
    Jan 2018
    Posts
    373

    Re: Help with G-code generation

    Quote Originally Posted by ecalva View Post
    Hi, we bought a VMC 1050 with 5 axis recently and we would like to generate G-code in mastercam but there is no profile for this machine in the software (neither in camworks or hsmwork) so I was wondering if anyone could give me advice about which profile would be compatible with the vmc 1050 and wich postprocessor.
    Any help would be apreciated
    Depends what software it's got.
    ie: Siemens, Fanuc, Mitsubishi etc.
    Their not going to list every individual machine that's been made are they. You'll be there all day looking for it.

  3. #3
    Member
    Join Date
    Sep 2019
    Posts
    6
    Sorry I know... that is why im looking for a compatible profile. I think the software controller is Yasnak as the machine seems to have all factory settings. Would be of great help to know where to start

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •