506,385 active members
3,122 visitors online
Register for free
Login
IndustryArena Forum > GENERAL MANUFACTURING PROCESSES > DRILLING > Drilling and tapping with subprogram
Results 1 to 1 of 1
  1. #1
    Member
    Join Date
    Apr 2016
    Posts
    2

    Drilling and tapping with subprogram

    How can I make this works?

    Im driving a Makino a92 with PRO5 and fanuc system.
    What I want to do is to use the same subprogram (positions of the holes) for the drill and tap.

    Example:

    T1=Drill
    T2=Tap

    Each Tool has it own program, bit then I call for the same subp.

    G81G99Z-22....drill cycle
    M98P10

    Next Tool
    S795
    M135
    G84G99Z-12.R5L0... Tapcycle
    M98P10

    The drill has the same depth on all the holes. The tap has different depths. Like first Hole -10 second -5 and so on.


    My subprogram looks like this.

    O0010(L1-L20)
    IF[600EQ0]GOTO1
    GOTO#600
    N1
    #600=1
    X-100.Y25.(L1) this Hole should be z-10 mindepth
    N2
    #600=2
    X-110.Y25.(L2) and this z-5
    and so on.

    Best regards!
    Last edited by rednake; 09-21-2019 at 08:29 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •