584,861 active members*
4,970 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2019
    Posts
    1

    Question Fanuc OM Series

    when tool change cycle is run, an alarm is displayed on the screen as T Code Error. Alarm No. is 1016. We need to understand how to eliminate this. Currently our ATC doesnt operate because of this.

  2. #2
    Join Date
    Dec 2008
    Posts
    3110

    Re: Fanuc OM Series

    On our OM controls on our Hardinges ...
    one of them needs M6 before the T code.
    so try M6 Tx;

  3. #3
    Join Date
    Dec 2019
    Posts
    2
    Quote Originally Posted by victor33 View Post
    when tool change cycle is run, an alarm is displayed on the screen as T Code Error. Alarm No. is 1016. We need to understand how to eliminate this. Currently our ATC doesnt operate because of this.
    ATC does the job till? Brief a bit on this.

    Regards,
    Seder Smith Tutuapp ShowBox Kodi
    Last edited by sedersmith; 12-21-2019 at 08:43 PM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •