Hey all!
I'd like to retrofit a spindle chiller onto my VMC15, but I need to get clarification on which ports on the spindle are used for plumbing this in... Hopefully someone will be able to answer this! I've attached a couple of photos with my best guess for the coolant in port, I know the port on the spindle flange is for the air curtain because that's already connected and working fine!
Also: does anyone know if all Fadal spindles were setup the same way internally in terms of plumbing? Given this machine did not come with a chiller will all the required seals and so on be present inside the spindle nose?
Thanks for any and all help!
-Aaron