Chinese 100W laser from Orion Motor. Cut fine for a while but one day it cut very poorly. I'm now on my 4th lens, they all cut fine for a few hours, then, BAM!! Looks like they get a little cloudy and then start absorbing the laser. One had a small hole cut all the way through it. Two darker ones are original and one laser people sent as a replacement. The lighter 3rd was one I bought off Amazon. I think previous two were 1.5" focus, I bought a 2".
ANY help would be GREATLY appreciated!!
Chuck
Thread: laser lens failures
Results 1 to 3 of 3
-
09-25-2019, 04:07 AM #1
Member
- Join Date
- Feb 2007
- Posts
- 5
laser lens failures
-
10-15-2019, 09:53 AM #2
Member
- Join Date
- Oct 2019
- Posts
- 37
Hello,
We are manufacture of fiber optic or CO2 laser equipment in China,if you need any marker,cutter,clener,please do not hesitate to contact me.
James
whatspp:18600395818
Email:[email protected]
-
11-12-2019, 09:37 PM #3
- Join Date
- Nov 2019
- Posts
- 7
Re: laser lens failures
What type of lens are you using? ZnSe, etc...
Reply With Quote
