584,833 active members*
5,406 visitors online*
Register for free
Login
IndustryArena Forum > Manufacturing Processes > Milling > Okuma VR-40 II Alarm help!!
Results 1 to 1 of 1
  1. #1
    Join Date
    Sep 2019
    Posts
    1

    Post Okuma VR-40 II Alarm help!!

    Hello, a couple of years back before i started working here the people working here decided to wash our machines with a pressure washer and the Okuma VR-40 II "broke" afterwards. It has just been standing here since but our boss decided today that we should try to see if we can fix the machine. The alarm we get is [1008-01 Alarm A] SVP Diff over X-Axis 19AE4. As far as i understand it has something to do with the X-Axis overtravelling or something like that but how does one fix this? The machine has a OSP 7000M operating system if that's any help. When we press the reset button the machine gets the normal open door "alarm" and then the spindle "jumps" a bit in X and then the alarm just resets. If we keep doing it it starts "jumping" into the wall of the machine a few times and then it changes direction from + to - and just keeps doing the same thing
    Last edited by Thrilmang; 09-26-2019 at 09:29 AM.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •