584,837 active members*
5,697 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 18m on Hardinge Conquest VMC 700 9XXX program lost
Results 1 to 2 of 2
  1. #1
    Join Date
    Sep 2019
    Posts
    1

    Fanuc 18m on Hardinge Conquest VMC 700 9XXX program lost

    Hello everyone,
    I have a second-hand machine model Conquest VMC 700 with a GA Fanuc18M, by mistake we have erased its memory during installation and I do not have the necessary 9XXX programs for its operation, Someone who has or knows someone who has that machine, could get me a backup copy of the machine or of these programs?
    Greetings

  2. #2
    Join Date
    May 2014
    Posts
    174

    Re: Fanuc 18m on Hardinge Conquest VMC 700 9XXX program lost

    Dear friend,

    I am stuck with the same problem here, our machine had a bad main CPU board and was replaced, but the parameters had not been saved.


    I wonder if you were able to get a copy from someone, somewhere, I will greatly appreciate if you could lend me a hand.


    Thank you very much in advance.


    Peloflex

Similar Threads

  1. Replies: 0
    Last Post: 03-05-2019, 09:14 AM
  2. Hardinge conquest SP parameters lost!
    By justinzwier in forum Hardinge Lathes
    Replies: 0
    Last Post: 04-02-2018, 07:30 PM
  3. Hardinge Conquest T 42 FANUC 0T optional parameters
    By bobancurug in forum Hardinge Lathes
    Replies: 10
    Last Post: 09-20-2015, 04:17 AM
  4. Hardinge Conquest VMC 700 (GE FANUC 18M) - Worklight Problem
    By Krevv in forum Bridgeport / Hardinge Mills
    Replies: 0
    Last Post: 12-13-2012, 04:08 PM
  5. Help on Fanuc 18m for Hardinge Conquest VMC 700
    By chuckblowers in forum Fanuc
    Replies: 3
    Last Post: 02-20-2012, 10:24 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •