I aquired a 2003 TRM. It had been sitting for quite awhile.
It lost its parameter settings.
In haste, I reloaded some defaults so I could jog the Z down to clear a door.
Now, I wanted to correctly reload the parameter settings.
First, is there a way to default the control, clear everything to start again?
The issue is that while I can change axis configuration, (its ok at X, Y, Z) it will not let me in to the field to change the travels, which it defaulted to and are incorrect.
I can't remove references to ATC and # of tools either, cant change the spindle RPM, RPM Factor etc. Won't let me cursor to those settings.
Attached are a couple of screen shots.
I'm out of ideas.
Thanks in advance.
Marty